
Here are a bunch of patches collected from Thompson's glib, Kesti's
version of glib, and others described in the postings below.  The
patches are in glib format.

Included are also tentative version of utilities to convert the D-10
patches from glib format to sysex dump format and vice versa.  'd10join'
reads a set of glib data files and produced a single dump file of a sort
that might be produced by a D-10 -- perhaps someone who actually has a
D-10 will check this out.  'd10split' performs the inverse
transformation.  See comments at the beginning of the source files.

After unsharing into a separate directory, type 'make' to uudecode the
patched and compile the two utilities.  Then 'make clean'.

		Greg, lee@uhccux.uhcc.hawaii.edu

::::::::::::::
d10-2-89
::::::::::::::
From: MICHAEL_ANDRE_ORTEGA@cup.portal.com
Newsgroups: rec.music.synth
Subject: D-10 SYS EXCL. DUMP
Message-ID: <14877@cup.portal.com>
Date: 20 Feb 89 18:29:00 GMT
Organization: The Portal System (TM)
Lines: 405

Here's a d-10 dump of my sys exc info from 2-10-89. It has still has

some factory presets and rythyms but also contains some new patches and

rythyms.   Mondre@cup.portal.com

--------------------------cut here----------------------------
section 1 of uuencode 2.13 of file D-10DUMP.ARC    by R.E.M.
::::::::::::::
d10dnvox
::::::::::::::
From: pete@wlbr.EATON.COM (Pete Lyall)
Newsgroups: rec.music.synth
Subject: D10/20/110 Sounds.. another bank
Keywords: D10 D20 D110 Roland Patches Bank Sounds Timbres
Message-ID: <26858@wlbr.EATON.COM>
Date: 21 Feb 89 20:01:10 GMT
Organization: Eaton IMSD, Westlake Village, CA
Lines: 195

Here is another bank of 64 D10/20/110 sounds. This one was created
such that most of the tones are variations on a 'voice' like sound.
Original creator was Dave Nosek on Compuserve.

After UUDECODING and de-ARC'ing, you can load these into your
D10 with any convenient SYSEX loader. There have been at least two
posted this past week (D10LIB.ARC [what I used to load it] and
just yesterday GETIT30.ARC).

Enjoy!

Pete Lyall
===========================  Cut Here  =============================
::::::::::::::
d10tones
::::::::::::::
From: pete@wlbr.EATON.COM (Pete Lyall)
Newsgroups: rec.music.synth
Subject: D10/20/110 free sound bank
Keywords: D10 D20 D110 Patches Sounds Timbres Tones
Message-ID: <26725@wlbr.EATON.COM>
Date: 17 Feb 89 22:58:04 GMT
Organization: Eaton IMSD, Westlake Village, CA
Lines: 358

This arc file contains a custom bank of D10 sounds as developed by
Dave Nosek on Compuserve. This is the start of an effort to spread the
wealth far, wide, and *free* between users of the D10, D20, and D110.
This specific file was dumped from Cakewalk (an IBM sequencer), but is
straight SYSTEM EXLUSIVE packets from the occurance of the first
$F0 on. A simple utility could be used to strip of those header bytes,
or IBM'ers could also use the D10LIB.ARC that I'll be posting at the
same time.

First make sure that your factory sounds are backed up, then have fun
with these. (Note: You can also use the D10LIB.ARC to dump from your
D10 to the PC. This also means that when you get creative and invent
some neat new sounds, you can capture them and post them here ;^}).

In any case, I hope this is only the first of a large volume of D10
sounds we see here.

Pete
========================== Cut Here ==============================
::::::::::::::
nosek-info
::::::::::::::
 64 TONES FOR THE D-10/20/110                          FEBRUARY 15, 1989
 1989 by David A. Nosek
 Compuserve 72117,325

 Uploaded to Compuserve for use with your Roland D10/20/110 and Cakewalk
 Pro or 2.0.  I hope you enjoy these, and that you will also share your
 creative ideas with other D10/20/110 owners.

 Here's a little help for you D10/Calkwalk owners on loading this file
 if you need it:

 1) Un-arc and copy "D10TONES.WRK" file to the directory that you store
    your Cakewalk .wrk files
 2) Load Cakewalk as you usually do
 3) Load the "D10TONES.WRK" file
 4) Go to the "VIEW" pull down menu
 5) Choose "SYSTEM EXCLUSIVE"
 6) If you haven't saved the tones in your keyboard, better do it now
    they will be gone after you load up!
 7) Load your new tones on the D10
   A) press "DATA TRANSFER"
   B) press display down to "ONE WAY BULK"
   C) press upper for "LOAD"
   D) press display down for "ONE-WAY LOAD SEL"
   E) press lower for "SOUND"
   F) press enter
   G) press write
   H) press enter
   I) execute Send on Cakewalk screen

 Multi-timbral B banks now have 64 new sounds listed below.


 1  Dave's Piano    17  SayWhat          33  Sing2me         49  NightVox
 2  New Voices      18  PopCorn          34  Rhoder          50  ScreamyVox
 3  The Krell       19  DungFoo          35  OrganTink       51  Voxiano
 4  Chirper         20  ButtKiss         36  BabyOrgan       52  PluckHer
 5  Time Out        21  NutsOfOzz        37  Pickaloo        53  DeathBass
 6  BassOrama       22  Honey            38  Clavatory       54  SpaceBass
 7  EchoPlux        23  MutedHoney       39  MutedHorn       55  Thumper
 8  PipeDream       24  Japz             40  HissOrgan       56  OKbass
 9  HitYerOrgn      25  VoxyPipes        41  Bowie           57  BlastBass
10  Night Out       26  Dreamin          42  StringFest      58  HollowBass
11  Fudge           27  Mergatroid       43  MrStrings       59  Electrify
12  New Day         28  Screamer         44  HornyStrgs      60  Electrify2
13  Mystify         29  GrandLand        45  StrgCheese      61  DewDrops
14  Voxy Lady       30  GrandKeys        46  SpacePad        62  50inHeaven
15  ScreaMoog       31  FMorize          47  Pad-O-Rama      63  GlasHeaven
16  Misty           32  FMland           48  WormDrive       64  HorrorFilm

