##Pleas note the 2 number signs, or pound signs in this file are for comments to help you to understand what the settings are and how to set them.  
## Language sets the language of your voice.  This setting is required for every voice that you make.
##The next line is a setting you can change.  However if you don't know the language codes it may be best to leave the setting as it is.
language variant

## The name setting is the name that will show up in the voice settings in the variant combo box.
##The next line is a setting you can change
name John

##The formant settings
##  Formant 0 is used to give a low frequency component to the sounds.
## The three numbers are frequency, strength, and Width, in that order.  Please note, the numbers are seperated by a space.
##The next line is a setting you can change
formant 0 82 80

# Formants 1,2, and 3 are the standard three formants which define vowels. 
##The next 3 lines are settings you can change
formant 1 90 80
formant 2 93 80
formant 3 95 80

# Formants 4,5 are higher than F3. They affect the quality of the voice. 
##The next 2 lines are settings that you can change.
formant 4 96 80
formant 5 95 80

## Formants 6, 7, and 8 are weak, high frequency, additions to vowels to give a clearer sound. 
##The next 3 lines are settings that you can change.
formant 6 92 90 125
formant 7 93 90 145
formant 8 94 90 165

##Intonation affects the rise and fall of the voice	
## The settings are 1 default, 2 less intonation, 3 less intonation and commas do not raise the pitch, 4 the pitch rises at the end of a sentence rather than falling.
##The next line is a setting you can change.
intonation 1

# Setting the pitch range.  The first number gives a base pitch to the voice (value in Hertz).  The second number controls the range of pitches used by the voice. Setting it equal
to the first number will give a monotone sounding voice.  The default values are 82 and 118. 
pitch 74 122
## The tone setting.  The first number on the setting line, 600, is the frequency setting for the amount of bass in the voice.  The second number on the tone line is the volume of the bass frequency.  You can set it from 0 to 255, 0 being the least amount, 255 being the most.
##The third number on the tone line, 1200, is the mid range frequency.  The fourth number on the line is the setting to change the volume of the mid range frequency.  0 being the least amount and 255 being the maximum.
## The fifth number on the tone line, 2000, is the treble frequency.  The sixth number is the volume of the treble frequency.  0 is the minimum and 255 is the maximum.
##  You will notice that all 3 frequencies are set to 255.
##The next line is a setting that you can change.
tone 440 255 880 255 2640 255
#Voicing indicates the strength of the vocal tract.
#A 0 forces no vocal tract, just the consonants.
Voicing 20 60
#Consonants forces the stressed s and t sounds to be a certain volume.
#A 0 here forces a "lisp", if you will.
Consonants 100 150
#The following three lines allow stress to be enforced.
#You can add stress, amplify it, and evenforce it to be a certain length.
StressAdd 15 15 15 15 15 15 15 15
StressAmp 20 20 20 20 20 20 20 20
StressLength 20 20 20 20 20 20 20 20
#These last two lines add a breath component to a variant.
Breath 255 255 255 255 255 255 255 255
BreathW 255 255 255 255 255 255 255 255
