                 SYNTHESIZER DRIVER NUMBER 17

                   KEYNOTE GOLD PC/SE CARD
                         (PULSEDATA)




    I. Loading parameters.


    I-1. REMINDER: SYNTAX TO RUN THE PROGRAM VOXPARLE.

    - FROM ANY DISK DIRECTORY:
       set voxparle=c:\voxparle
       C:\VOXPARLE\DRIVER OPTION
       C:\VOXPARLE\VOXPARLE

    - From VOXPARLE directory:
       DRIVER OPTION
       VOXPARLE

    OPTION is the loading option and is different according to
the synthesizer; DRIVER is the synthesizer driver; VOXPARLE is
the main program.


    I-2. KEYNOTPC driver.

    Here, OPTION stands for an order number corresponding to a
base Input/Output address in the system working area. The
number can vary from 1 to 3, depending upon the card I/O
address. The authorized address numbers are respectively as
follows:
       1 = 2E8H
       2 = 2A8H
       3 = 3F8H    (SE CARD ONLY)
    DRIVER is the name of the file corresponding to the speech
synthesizer, namely KEYNOTPC.

    Example: if the internal PC card is programmed to work at
the address 2E8H (factory settings), the correct syntax is:

    - From any disk directory:
       SET VOXPARLE=C:\VOXPARLE
       C:\VOXPARLE\KEYNOTPC 1
       C:\VOXPARLE\VOXPARLE

    - From VOXPARLE directory:
       KEYNOTPC 1
       VOXPARLE



    II. SYNTHESIZER PARAMETERS.


    II-1.
    ALT-F1 ALT-F2.
    Pitch.

    This feature modifies the voice and elocution pitch.


    II-2.

    ALT-F3 ALT-F4
    Speed.

    Slows down or accelerates the elocution speed of the
synthesizer.
    It also allows to adjust the rate of the automatic
document reading facility.


    II-3.

    ALT-F5 ALT-F6
    Language.

    Changes the language, depending upon the available ROMS.


    II-4.

    ALT-F7 ALT-F8
    Prosody.

    Modifies the elocution prosody producing a more or less
excited voice.


    I-5.

    ALT-F9 ALT-F10
    Volume (SE card only).

    Decreases or increases the synthesizer speaker volume.
