MAGNERIFIK Screen Enlargement Program. Version 1.06 for MS Windows

Thank you very much for trying out our new exciting Windows
enlargement program.  The program provided on this diskette
is a full-function version of the Magnerific product to assist
you in making a complete evaluation.

For further information concerning the Magnerifik MS Windows
enlargement program or to register your copy, call or write:

Technology For Independence Engineering
529 Main Street
The Schrafft Center
Boston, ma 02129

Phone: (617) 242-7007
Fax: (617) 242-2007
Internet: tfi@netcom.com

Getting started:
___________________

This diskette contains files to demonstrate the Magnerifik
product.  The full-function demonstration product is designed to last for
30 minutes.  After 30 minutes it must be restarted.

The Magnerifik demonstration files can be installed from a diskette
or from your hard drive.  No matter where the installation
is performed, the files will be installed to your C: drive to a
directory named c:\magner.  The installation program also assumes
that you have installed Windows in the c:\windows directory.  If your
Windows files are in a different directory, you will need to make
corresponding changes to the installation batch files.


Installing Magnerifik from diskette:
____________________________________

1. Place your demonstration diskette in either drive A: or B:.

2. Go to a DOS command prompt

3. Change your default drive to the drive where the installation
diskette resides e.g. if it is in the A drive, type A: then press the
Enter key. 

4. Start the installation program by typing:
     INSTALL
     and press the Enter key

5. After you install:  Make sure that Windows is using the VGA display
driver.  You can do this by invoking Windows Setup from the Main
program group.  Double clicking on this will bring up a display of
the current setup.  The first item here will be the display.  If it
is not set to VGA, you will need to change it.  To do this, click on
the Options menu and choose the "Change System Settings" item.  This
will bring up a box where you will be able to choose from several
different display drivers.  Clicking on the arrow corresponding to
the Display item in this box will bring up a list.  Scroll down the
list until you find VGA and click on it.  Then click on the OK
button.  You will need to restart windows for the changes to take
effect.  

To create a Program Item for Magnerifik please see the section below.


Installing Magnerifik from the hard drive:
__________________________________________

You might have downloaded this demonstration copy from the TFI
Internet site, in which case you will need to install Magnerifik from
a hard drive:

1. Copy the original installation files into a temporary directory
e.g. C:\magtemp


2. Change to the directory where the Magnerifik demonstration
     installation files were copied, by typing:
          CD \<directory-name>
          then press the Enter key
Where the <directory-name> is the directory of the
     Magnerifik demonstration installation files.

3. Install the Magnerifik demonstration files by typing:
     INSTALL
     then press the Enter key

4. After you install:  Make sure that Windows is using the VGA display
driver.  You can do this by invoking Windows Setup from the Main
program group.  Double clicking on this will bring up a display of
the current setup.  The first item here will be the display.  If it
is not set to VGA, you will need to change it.  To do this, click on
the Options menu and choose the "Change System Settings" item.  This
will bring up a box where you will be able to choose from several
different display drivers.  Clicking on the arrow corresponding to
the Display item in this box will bring up a list.  Scroll down the
list until you find VGA and click on it.  Then click on the OK
button.  You will need to restart windows for the changes to take
effect.  

To create a Program Item for Magnerifik please see the section below.


Online Help
___________

Online Help is available for Magnerifik by clicking on the Minus
button on the top left corner of the Magnerifik window and selecting
the Help item.

Creating a Program Item
_______________________

You can also create a Program Item for Magnerifik.  To do this, choose
the New item from the File menu in the Program manager and click on
OK in the dialog box that pops up.  A box titled "Program Item
Properties" will then pop up.  

In the Description field, type Magnerifik
In the Command Line field, type c:\magner\magner
In the Working Directory field, type c:\magner

Then click on OK and the Magnerifik Program Item will be added to
your current Program Group.  You can then move the icon to the
Program Group of your choice.  To have Magnerifik start up
automatically when you start Windows, copy or move the icon to the
Startup Program Group.


Removing the Magnerifik demonstration program
_____________________________________________

Using the demonstration diskette:

1. Place the demonstration diskette in drive A: or B:.
2. Change to the drive the demonstration diskette resides.
     (refer to installation for instructions on changing to the
     disk drive).
3. To remove the installed files, type:
     REMOVE
     then press the Enter key.
4. Re-start windows

From the hard drive:

1. Change to the drive and directory where the Magnerifik
     demonstration installation files were placed.
     (refer to installation for instructions on changing to the
     drive and directory).
2. To remove the installed demonstration files type:
     REMOVE
     then press the Enter key.
4. Re-start Windows.


Removing the Program Item:
__________________________

To remove the Icon, click on it and choose the delete item from the
File menu in the Program Manager.



