64UST303.EXE - ATI Technologies Inc.
panaStation drivers for Microstation 4.0 and 5.0
*****************************

1.0     Introduction
2.0     Installation Notes

*****************************

1.0     Introduction

This product was developed by Panacea Inc. exclusively for use with 
ATI's family of mach64 accelerators. This version of PanaStation has 
been designed to specifically support DOS versions of MicroStation 
1.0, 2.0, 3.0, 4.0 and 5.0.

*****************************

2.0     Installation Notes

1. Do NOT attempt to perform the driver installation from within 
   MicroStation. Exit Microstation completely, and perform the 
   following operations in DOS.

2. Run 64UST303.EXE from the directory it was downloaded into.  For this 
   example we will say 64UST303.EXE is located in C:\ATI303.
   eg.  CD ATI303        ;press enter
        64UST303.EXE     ;press enter

5. Follow the screen prompts for installing the CAD drivers.

6. Once the driver has been installed, you can run UNSTALL.EXE from 
   C:\ATI\SUPPORT\USTATION to delete the contents of the temporary directory.

7. We recommend that you keep a copy of 64UST303.EXE in case you need to
   install the driver again.   

8. For further configuration instructions, please consult the file 
   MANUAL.TXT.

*****************************
