Application Drivers                                      

The \DRIVER directory contains following files:

        README          The file you are reading.

        WTADI.COM       Tablet driver for ADI(AutoCAD) interface.

        WTADI.SYS       Tablet driver for ADI(AutoCAD) interface
                        used in CONFIG.SYS file.

Using WTADI.COM

        The file is a tablet driver for ADI interface.  You can run one
        of below samples under DOS prompt to install your ADI driver.

        Samples:
        >WTADI          install ADI driver on default COM1
        >WTADI /1       install ADI driver on COM1
        >WTADI /2       install ADI driver on COM2
        >WTADI /3       install ADI driver on COM3
        >WTADI /4       install ADI driver on COM4
        >WTADI /U       uninstall ADI driver(auto find COM1/COM2/COM3/COM4)
        >WTADI /u       uninstall ADI driver(same as command "/U")


Using WTADI.SYS

        Same as WTADI.COM, the file is a ADI tablet driver, too.  But
        you install it in CONFIG.SYS as one of below Samples.

        Samples:
        DEVICE=WTADI            install driver on default COM1
        DEVICE=WTADI /1         install drvier on COM1
        DEVICE=WTADI /2         install driver on COM2
        DEVICE=WTADI /3         install drvier on COM3
        DEVICE=WTADI /4         install driver on COM4

        caution: It can't uninstall(release memory) when installed.


Setup AutoCAD

        You can use ADI driver on AutoCAD.  Following are the steps to
        setup AutoCAD to use ADI tablet:

        1. run AutoCAD

        2. select item 5 "Configure AutoCAD" under Main Menu

        3. select item 4 "Configure digitizer" under Configuration menu

        4. You will find AutoCAD message:
           Ŀ
               Your current digitizer is: XXXXXX                
               Do you want to select a different one? <N> _     
           

           type "Y <enter>"

        5. AutoCAD message:
           Ŀ
               Serial Number:  XX-XXXXXX                        
                                                                
               Available digitizers:                            
                                                                
                 1.  None                                       
                 2.  ADI Digitizer                              
                 3.  Calcomp 2000                               
                 4.  Calcomp 2100                               
                 5.  Calcomp 2500 Series                        
                 6.  Calcomp 9000 Series                        
                 7.  Calcomp 9100 Series                        
                 8.  Disc Instruments Lynx Trackball            
                 9.  GTCO Digi-Pad (Types 5 & 5A)               
                10.  GTCO Micro Digi - Pad (Types 7)            
                11.  Geographic Drafting Board                  
                12.  Hewlett-Packard Digitizer                  
                13.  Hewlett-Packard Mouse Accessory            
                14.  Hitachi HICOMSCAN HDG Series               
                15.  Hitachi Tiger Tablet                       
                16.  Houston Instrument HIPAD                   
                17.  Houston Instrument Series 7000             
                18.  Houston Instrument TG-1000                 
                19.  Houston Instrument TG-8000                 
                20.  IBM Mouse                                  
              -- Press RETURN for more --                       
                21.  Joy stick for Koala Pad                    
                22.  Kurta Series I                             
                23.  Kurta Series II and III                    
                24.  Logitech Logimouse                         
                25.  Microsoft Serial or Bus Mouse              
                26.  Mouse System Mouse                         
                27.  Mutoh Digitizers                           
                28.  Numonics 2200                              
                29.  Pencept 320 Character Recognition Tablet   
                30.  SAC Grafbar                                
                31.  Scriptel SPD Series                        
                32.  Seiko DT Digitizers                        
                33.  Summgraphics Bit Pad One                   
                34.  Summagraphics MM Series                    
                35.  Summagraphics MicroGrid                    
                36.  Summagraphics SummaMouse                   
                37.  Torrington Manager Mouse                   
                                                                
              Select device number or ? to repeat list <X>: _   
           

           type "2 <enter>" to select ADI Digitizer

        6. AutoCAD message:
           Ŀ
               Hexadecimal interrupt code (INT 0XXh) <79>: _    
           

           no change, type <enter>

        7. return to Configuration menu, type <enter>
           AutoCAD message:
           Ŀ
               If you answer N to the following question, all configuration   
               changes you have just made will be discarded.                  
                                                                              
               Keep configuration changes? <Y> _                              
           

           Yes! type <enter>

        8.  You can appoint or realign your tablet menu and screen
            mapping area with the "TABLET CFG" command.  Please refer to
            AutoCAD Reference Manual, Chapter 12, Section 12.4.4 TABLET CFG,
            and Appendix A:  A.3.4 Tablet Menu.

End of file                                             Wintime Technology Inc.
