
WINTAB Tablet Driver

1. Introduction

     before "WINTAB.DLL" driver is issued, PC user should use mouse as
   system cursor to open AutoCAD for WINDOWS program. Then digitizer can
   be used as cursor in AutoCAD operation. With  "WINTAB.DLL"  driver,
   Tablet as cursor input device in R12 OR R13 & Windows could be possible.
   In addition to initial point function, this driver provides more feature
   like pickup, mole etc.

2. Driver features

   2.1. Driver let digitizer operate as "Digitizer"

        This driver let user can use R13 template as well as  the  other
        digitizer driver can do. User can pickup macro key  direct  from
        digitizer.

   2.2. Driver can operate as "MOLE"

        User can define "MOLE" area , and cursor in "MOLE" area acts  as
        system cursor.

   2.3. Drive can automatically toggle system/R13/R12

        This driver automatically detects operator's AutoCAD command  to
        change tablet as system cursor or R12/R13 cursor input device.

3. Driver installation

   Copy WINTAB.DLL to Windows\system directory.
     Ex. copy WINTAB.DLL \Windows\system

4. Driver configuration

   4.1. In R12/R13 command line type config. press return key.
   4.2. Press return key.
   4.3. Select 4 for configure digitizer. press return key.
   4.4. Select Wintab compatible Driver. press return key.

5. Driver version note

     This driver is version 1.0, and must use tablet.drv 4.X for windows
   system.
