Hal95 Demonstration Version

This is a fully functional demonstration version of Hal95 1.01
It works for 40 minutes before halting. To run the demo again you
must first restart Windows 95. 

Installation Instructions for demo.

1. Decide where to put the demo software.

   From the DOS prompt create a directory for the hal95 demonstration
   software. Change to that directory using the cd command.

        Example.
                c:
                cd \
                md h95demo
                cd h95demo

2. Unzip the file.

   If you have a demo floppy disk you can use the unzip program
   provided on this disk. Just type

        a:unzip a:\hal95.zip

   If you have downloaded hal95.zip from the internet or obtained it
   elsewhere you must also obtain an unzip program. The most common one
   is PKUNZIP from PKWARE INC.

   If you have pkunzip you MUST use the -d paramter to recreate the
   directory structure.

        pkunzip -d a:\hal95.zip

3. Run the setup program.

   Using windows explorer run the SETUP.EXE program in the Hal95
   Demonstration directory or just type SETUP in that directory if you
   are in a DOS prompt inside Windows 95.

   This will allow you to select your synthesiser and create a program
   group icon for Hal95.

   You MUST run the SETUP program to select your synthesiser or Hal95 will
   be unable to run.

4. Run Hal95

   SETUP.EXE will automatically start Hal95. You can also run Hal95 from
   within the start menu.

   You can run SETUP.EXE at any time in the future to change your
   synthesiser selection.

