You can use CW.SET with Calcworthy and Vocal-Eyes 3.0.  There are
two ways you can
activate this .SET file.

1)  You could pop up Calcworthy with the CTRL-ALT-C command. 
Then popup Vocal-Eyes' Voice Control Panel and use the load
options to load CW.SET.  After you pop out of Calcworthy, you
could then go through the same procedure to reload the correct
.SET file for the current applications program.

2)  If you are using version 1.3 or greater of Calcworthy, you
can have Vocal-Eyes automatically load the correct .SET file
while Calcworthy is popped up and switch back to the original
.SET file when popped down.

We are sure you will prefer to use the second method.  Therefore,
the following will assume you are using this method.

First, you must allocate at lease one .SET buffer in Vocal-Eyes. 
This is so the current applications .SET file can be loaded and
the Calcworthy .SET file can be loaded.  To do this, issue the
following command the first time Vocal-Eyes is loaded:

                             VE /!F1

This will allocate ONE  .SET buffer.  If you wish more, simply
Type your desired number in place of the current number of 1. 
Then, let Vocal-Eyes load your application's .SET file into the
"zeroth" .SET area and load CW.SET in the first buffer.  You
could
issue the following command to load both .SET files:

                         VE /F0APP /F1CW

We used APP.SET for our current applications .SET file.  Simply
replace this with your actual file name.  Now, when you load
Calcworthy the first time, issue the following command:

                             CW /!V1

This will tell Calcworthy you are using Vocal-Eyes and the CW.SET
file is in RAM1.  This way, when you popup Calcworthy, it will
inform Vocal-Eyes to swap the current .SET file with RAM1.  This
will make CW.SET active and save the current settings in RAM1. 
When you pop out, Calcworthy will once again inform Vocal-Eyes to
swap the current .SET file with RAM1.  This will restore your
settings to what they were exactly prior to popping up
Calcworthy.  What could be easier?

Just remember, you must have CW.SET loaded into one of
Vocal-Eyes' RAM locations and you must inform Calcworthy which
RAM location you have placed it in.  Calcworthy and Vocal-Eyes
will handle the rest.